Laser Marking Machine consists of five parts, namely laser, laser lens, galvanometer, marking card and computer, machined parts of the shell.
The fiber splitter is highly efficient.
First of all, laser cutting is a non-contact cutting, clean, safe and pollution-free. During laser cutting, the laser head of Laser Cutting Machine has no contact with the workpiece and there is no tool wear.
After each use, open the Automatic discharge centrifuge lid to allow the heat or moisture to evaporate naturally. If the Automatic discharge centrifuge used low-temperature centrifugation before, there may be ice, so wait for the ice to melt and wipe with dry cotton gauze Clean, and then close the lid when there is no obvious moisture.
According to the safety issues of Box centrifuge, Box centrifuge is a kind of high-speed equipment. How can I judge whether the equipment is qualified when buying Box centrifuge? The following requirements of Box centrifuge are the key items. If one item fails to meet the requirements, the safety performance of Box centrifuge is judged unqualified:
Before operating the Fluorescent powder centrifuge, the power supply should be cut off and the centrifuge brake should be released first.
